PARALLEL-CONNECTED
SINUS PENTA MODELS
ASSEMBLY
INSTRUCTIONS
9/
24
Figure 2: Nameplate for the First Slave drive
3. MECHANICAL INSTALLATION
The parallel-connected drives may be the Master drive, the First Slave and the Last Slave.
Master drive
this is drive housing the control board and it is always installed on the left-hand side of the
slave drives.
First
Slave drive
this is the slave installed in the middle position when there are N.3 parallel-connected
drives.
Last
Slave drive
this is the drive installed on the right-hand side in the configuration including N.2 or N.3
parallel-connected drives.
CAUTION
Any configuration other than that covered in this manual may damage the
equipment or lead to serious malfunction.
