Santerno SINUS PENTA S41, Assembly Instructions Manual

Page: 6 / 24

ASSEMBLY
INSTRUCTIONS PARALLEL-CONNECTED
SINUS PENTA MODELS
6/ 24
Drive size
Drive
model
N. of
drives to
be parallel
connected
Final
size
Final
model
Applicable motor power with overload up to 120%
Inom Imax
525-575Vac 660-690Vac
kW HP A kW HP A A A
S42 0259 2 S44 0459 630 860 720 710 970 696 720 880
S52
0290
2 S54
0526 710 970 800 800 1090 773 800 960
0314 0600 800 1090 900 900 1230 858 900 1100
0368 0750 900 1230 1000 1000 1360 954 1000 1300
0401 0828 1000 1360 1145 1240 1690 1200 1200 1440
S52
0368
3 S56
0960 1270 1730 1480 1530 2090 1480 1480 1780
0401 1128 1460 1990 1700 1750 2380 1700 1700 2040
Drive supply voltage 525-575Vac 525-575Vac
Table 2: Drive sizes that can be obtained when applying 500V to 690V supply voltage
Key:
Inom = continuous rated current of the drive
Imax = maximum current that can be delivered by the drive for 60s every 10 min.
CAUTION
The drive size to be obtained involves configuring the drive electronic boards
accordingly. Specify the drive configuration to be otabined at the same time as
ordering the equipment.
CAUTION
Do not change the layout and wiring covered in this manual when parallel
connecting the SINUS PENTA drives. Any configuration other than that covered
in this manual is not allowed and may damage the equipment or lead to
equipment malfunction.