Bedienungsanleitung / User manual
VTC-8100P / VTC-8112P / VTC-8200P / VTC-8212P / VTC-8300WDP / VTC-8312WDP
_________________________________________________________________________________
- 37 -
2.4.4 Flange back adjustment
The camera has a CS-mount lens thread. Depending on the used lens it may be necessary
to use the C-mount adapter (which is included in this delivery).
If still no focus can be achieved at the lens, you have the option of using the flange back
adjusting lever (only advisable for experienced users!):
Loosen the little lock screw below the flange back adjusting lever, using the Allen wrench
(which is included in this delivery).
Now carefully turn the lever left or right to adjust the flange back. Fasten the little lock screw
again.
2.4.5 Light adjustment of illuminates strips and logo via OSD
You can switch off the background light of the camera logo (located on the camera front) and
the two illuminated strips (located on the camera sides).
illuminated camera logo
illuminated strip
lock screw for flange
back adjusting lever
ring for flange back
adjustment
