Bedienungsanleitung / User Manual SPVM-20AC / SPVM-26AC / SPVM-32AC
_________________________________________________________________________________
- 63 -
5.4.7 IR-set
This is used to select the IR cut filter operation mode.
OFF
:
If you select this mode, the IR cut filter is switched off.
AUTO: If you select this mode, the IR cut filter is at AGC-LEVEL: You can then select the
output by choosing the switch delay time of 1, 5, 10 ,20 ,30 ,40 ,50 or 60 sec.
EXT:
If you select this mode, the IR cut filter is set to external signal.
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
5.4.8 Digital zoom
This is used to select the digital zoom and digital pan/title operation mode.
OFF
:
If you select this mode, the digital zoom is switched off.
ON
:
If you select this mode, the digital zoom is set to 2x. At the this mode, you can
move the “ZOOM POSITION” by using the [UP] and [DOWN] key.
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
