35
COMM ID:
Communication ID for the RS232 and RS485
communication ports. After the DVR
receives a
RS232 or RS485 command, it checks if the
<Dest ID> within the code is the same as the
COMM ID, in which case the particular
command can be accepted.
RS-232:
The RS-232 communication port can be
either in an importing or exporting mode
according to your applications.
ON:
Enables the RS-232 communication port.
When you wish the unit to be controlled
by an external device, please select this
entry for use.
OFF:
Disables the RS-232 communication
port.
RS-485:
The RS-485 communication port can be
either in an importing or exporting mode
according to your applications.
ON:
Enables the RS-485 communication port.
When you wish the unit to be controlled
by an external device, please select this
entry for use.
OFF:
Disables the RS-485 communication
port.
BAUD:
You have the option of using a Baud rate ( at
8 different levels :
2400
,
4800
,
9600
,
19200
,
28800
,
38400
,
57600
or
115200
).
NET ENABLE:
This option enables or disables the Ethernet
communication port.
OFF:
Disables it.
ON:
Enables it.
NET DHCP:
This option enables or disables the Ethernet
communication port.
OFF:
Disables it.
ON:
Enables it.
NOTE:
If provided with a DHCP server, the DVR
can get an IP automatically by setting this option
to ON.
NET IP:
This option is used to configure the Ethernet
communication settings. This is required for
the purpose of making a network connection.
Please
consult
with
a
qualified
MIS
professional to configure it.
IP:
XXX.XXX.XXX.XXX
MASK:
XXX.XXX.XXX.XXX
GATEWAY:
XXX.XXX.XXX.XXX
HTTP PORT:
XXXX
NET ACCOUNT:
FTP SETTING:
This entry allows users to set the FTP File
Transfer Protocol.
NET ACCOUNT
USERNAME
PASSWORD
ADMIN [admin ] [9999]
VIEW [view ] [0000]
SET NET ACCOUNT
COMM SETTING
COMM ID
:01
RS232
:ON
RS485
:ON
BAUD
:2400
NET ENABLE
:OFF
NET DHCP
:OFF
NET IP
:SET
NET ACCOUNT
:SET
FTP SETTING
MAIN PAGE
