User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
_________________________________________________________________________________
- 50 -
7.3. Record
7.3.1 General
1. The menus are displayed with options on the left-hand column and settings in the
right hand column. A cursor (highlighted menu) can be moved using the direction
buttons [
] .
2. Change the below options using the [ - + ] buttons.
Schedule use:
This enables or disables the night zone. By default it is set to
“OFF”.
Bootup record:
It starts recording without press
ing [REC] button when it set “ON”.
Disk overwrite:
Select the record policy of the hard disk drive.
- ON: By default, the hard disk drive will overwrite from the beginning when it
becomes full (ring buffer).
- OFF: It stops recording after HDD is full.
Auto delete:
Allows you to configure when the DVR automatically deletes all data from the
HDD. You can choose from the following options.
None
12 hours
1 day~ 6 days
1-4 weeks-> 30 days
Pre-record:
Determines how long the recording prior to an event should last:
5-300 sec. By default it is set to 5 sec.
Post- record:
Determines how long the recording after to an event should last:
5-300 sec. By default it is set to 10 sec.
Note:
The alarm/motion recording will be extended if there is another alarm/motion
detection during the event recording.
3. To save changes and exit the menu, press the [MENU] button.
To exit the menu without making changes, press the [CANCEL] button.
