User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
_________________________________________________________________________________
- 46 -
Split mode:
Select the desired sequence mode display.
Note:
This function is limited to the spot monitor.
Used channel:
Select the cameras to be included or excluded from the automatic switching.
3. To save the changes and exit the menu, press the [MENU] button. To exit the menu
without making changes, press the [CANCEL] button.
4. Press and hold the [DISPLAY] button for 2 seconds to automatically toggle between
cameras on the main monitor.
Press the [SPOT] button and then the [DISPLAY] button for approx. 2 seconds to
automatically toggle between cameras on the spot monitor.
7.1.3 Event
This menu will be activated when you select the EVENT mode in the switch setting.
The event menu will allow you to customise motion, alarm and video loss.
If an event is trigged, e.g by an alarm, motion or video loss, it will be displayed on the monitor
which is configured for event.
