User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
_________________________________________________________________________________
- 47 -
7.2 Camera
Configure the properties of the camera.
1. Press left/right buttons [
] or the number button to select the desired camera.
2. The camera channel option is highlighted and the camera settings are displayed.
3. The menus are displayed with options on the left-hand column and settings in the right
hand column.
Depending on your “category” selection, either “grid” or “tune” is displayed with the following
setting options:
Grid:
Motion level:
The motion level of each camera can be adjusted by pressing buttons [ - ] and [ + ].
Default setting is 10.
Motion grid:
o
The sensitivity can be set from 1 (low) to 20 (high). Default setting is 10
o
The respective function is highlighted. The motion can be monitored in the display
window. Default settin is OFF.
Privacy mask:
o
To be in line with privacy regulations, you may cover (mask) certain areas by a
rectangle in the picture (live picture, recording and playback).
o
Default setting is OFF.
o
Press the down button on the recorder front panel or on the remote control to call
up the “privacy mask” function. The grid is displayed.
o
Right-click on the
icon.
To define the motion grid or the privacy mask cell-by-cell, do
the following:
On the front panel or remote control, press any of direction
buttons to highlight a cell in the motion detection area, and
then press [ +] . This area is selected and the cells are
highlighted in red.
Select all. Press [Enter] or [ + - ] to select.
Clear all. Press [Enter] or [ + - ] to select.
Select specific. Press [Enter] or [ + - ] to select.
