Bedienungsanleitung / User manual HEL-IR65D / HEL-IR75D
_________________________________________________________________________________
- 22 -
3. Put the power cable and video cable through the bottom of the housing (fig. 6).
Plug and fix the power cable to the terminal and plug the video cable to the video
output of the camera (fig. 7).
Next, use the provided 4 silver screws to fix the housing onto the bracket using a
hegaxon screw driver. Do not forget to install the gasket, too (fig. 8).
4. Adjust the focus and the iris of the lens on the camera and then adjust the camera
position on the supporter (fig. 9 and fig. 10). When finished, tighten all screws (fig 11).
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
