Bedienungsanleitung /
User manual
DSR-2504H, DSR-2516H
_________________________________________________________________________________
- 91 -
5. Switching on and off
5.1 Switching on
Verify that the camera(s) are properly connected to the recorder and that they are
switched on.
Connect one or several monitors to the recorder (VGA, HDMI, spot monitor BNC).
Connect a mouse to the recorder‘s USB port on the rear or front panel.
DSR-2504H: Connect the recorder to power. The recorder boots automatically, along
with a beep sound.
DSR-2516H: Connect the recorder to power. Use the power-on button on the
recorder rear to switch it on. The recorder boots, along with a beep sound.
The power LED on the front panel lights up in blue and the recorder starts operating.
Depending on your settings, the live image of the camera(s) or the wizard appears
(you can adjust the wizard settings here:
Menu
Setup
Basic
System
Show wizard (see chapter 8.1.1.1)
5.2 Login
In order to have full access to the recorder, you have to login. Click anywhere on the screen
to call-up the login window:
Click into the entry field of the user name resp. password. The virtual keyboard pops up.
Enter your user name and password and confirm by using the Enter key:
Default user name:
admin
Default password:
123456
For security reasons, it is highly recommended to change the default user name and
password and to enter another user.
Please see chapter 8.1.7.
