-
15 -
CARE AND MAINTENANCE
Stimulator
The stimulator may be wiped clean with a small amount of soapy water on a clean cloth. Do not submerge the stimulator
in liquids or expose it to large amounts of water.
x
Never use aggressive cleaning products of stiff brushes to clean the device.
x
Remove the battery before cleaning the device.
x
Do not use the device again until it is completely dry.
x
Do not expose the device to direct sunlight and protect it from dirt and moisture.
Cables
x
Disconnect the cables from the stimulator and electrodes.
x
Do not pull on the cables, but on the connectors attached to the ends of the cables.
x
Store the stimulator with the cables in a clean, dry place.
Electrode
The electrode pads are disposable and use an adhesive that will dry after prolonged usage or storage. Pads should be
replaced when they lose their adhesive quality, or you sense a change in stimulation sensation.
To order replacement pads, please visit
http://gurinproducts.com/
, or contact authorized distributor(s).
How to Store Your System
1. Store your System at room temperature in a dry place, out of the reach of children.
2. If the stimulator will not be used for more than a week, remove the battery from the stimulator.
