-
9 -
Turning On the Device
1. Press and hold the ON+ button for one (1) second to turn on the
device.
2. The most recently selected treatment time and program will flash
when the unit is turned on.
Ÿ1RWH
: Do not turn the unit on until all electrodes and lead
wires are properly attached.
Ÿ1RWH
: When stimulating the muscles of the arms or legs in the EMS
Mode, bear in mind that the muscle contraction may cause
involuntary limb movement which could cause injury to you or
others. Always ensure the limb is secured to prevent
movement.
Turning Off the Device
1. The device turns off automatically after the therapy session time has
elapsed.
2. To turn the unit off manually, press the OFF- button for three (3)
seconds. The display will go blank and the device will turn off.
3. In an emergency you may also pull the connector(s) from the device
and then remove the belt.
Ÿ1RWH
: To prevent unpleasant electric shocks, never remove the
Electrodes
while it is still turned on.
Selecting the Treatment Time
1. Press MODE. The preset (default) treatment time will flash on the display.
2. To increase or decrease the treatment time, press the button ON + (to increase) or the button OFF – (to decrease)
repeatedly until the desired duration appears on the display.
3. Press MODE again to save your selection. The treatment time you selected will appear on the display the next time
you turn the device on.
Ÿ
Note:
If you change programs during the course of a therapy session, the treatment time will not reset unless you
manually reset it by performing the steps described above.
