Sans Digital EliteRAID ER104I+ User Manual Download

Page: 7 / 64

- 7 -

DeGraded mode. Not all of the array’s member disks are functioning, but the

array is able to respond to application read and write requests to its virtual disks.

SCSI

Small Computer Systems Interface.

SAS

Serial Attached SCSI.

iSCSI

Internet Small Computer Systems Interface.

SAS

Serial Attached SCSI.

FC Fibre

Channel.

S.M.A.R.T.

Self-Monitoring Analysis and Reporting Technology.

WWN

World Wide Name.

HBA

Host Bus Adapter.

SAF-TE

SCSI Accessed Fault-Tolerant Enclosures.

SES

SCSI Enclosure Services.

NIC

Network Interface Card.

LACP

Link Aggregation Control Protocol.

MPIO Multi-Path

Input/Output.

MC/S

Multiple Connections per Session

MTU Maximum

Transmission Unit.

CHAP

Challenge Handshake Authentication Protocol. An optional security mechanism

to control access to an iSCSI storage system over the iSCSI data ports.

iSNS

Internet Storage Name Service.

1.3

RAID levels

RAID 0

Disk striping. RAID 0 needs at least one hard drive.

RAID 1

Disk mirroring over two disks. RAID 1 needs at least two hard drives.

N-way mirror

Extension to RAID 1 level. It has N copies of the disk.

Summary of Contents for EliteRAID ER104I+

































































Search results

Summary of Contents for EliteRAID ER104I+

Reviews:

Related manuals for EliteRAID ER104I+

Brands by name

Popular brands

Sans Digital EliteRAID ER104I+, User Manual

Search results

Summary of Contents for EliteRAID ER104I+

Reviews:

Related manuals for EliteRAID ER104I+

Brands by name

Popular brands