- 46 -
To delete the RAID group, please follow the procedures:
1.
Select “/ Volume configuration / RAID group”.
2.
Select a RG which is no VD related on this RG, otherwise the VD(s) on this RG must be
deleted first.
3.
Mouse moves to the gray button next to the RG number click “Delete”.
4.
There will pop up a confirmation page, click “OK”.
5.
Done. The RG has been deleted.
Step 9: Free global spare disk.
To free global spare disks, please follow the procedures.
1.
Select “/ Volume configuration / Physical disk”.
2.
Mouse moves to the gray button next to the PD slot; click “Set Free disk”.
Step 10: Done, all volumes have been deleted.
3.7
Enclosure management
“Enclosure management” allows managing enclosure information including “SES configuration”, “Hardware
monitor”, “S.M.A.R.T.” and “UPS”. For the enclosure management, there are many sensors for different
purposes, such as temperature sensors, voltage sensors, hard disks, fan sensors, power sensors, and LED
status. Due to the different hardware characteristics among these sensors, they have different polling
intervals. Below are the details of polling time intervals:
1.
Temperature sensors: 1 minute.
2.
Voltage sensors: 1 minute.
3.
Hard disk sensors: 10 minutes.
4.
Fan sensors: 10 seconds . When there are 3 errors consecutively, controller sends ERROR
event log.
5.
Power sensors: 10 seconds, when there are 3 errors consecutively, controller sends ERROR
event log.
6.
LED status: 10 seconds.
Figure 3.7.1
Tips
The action of deleting one RG will succeed only when all of the related VD(s) are deleted in
this RG. Otherwise, it will have an error when deleting this RG.
