SanRex SANARG 160P, Operator'S Manual

Page: 14 / 82

14
SYMBOL SOURCE OF HAZARD HAZARD HOW TO AVOID
Any Coatings on Base
Metal, Weld Process Fumes and
Gases
Keep your head out of the fumes.
Do not breathe the fumes.
Use enough ventilation or exhaust
at the arc, or both, to keep fumes
and gases from your breathing
zone and general area.
Welding & Cutting
Toxic Fumes,
Electric Shock
Be alert, aware, and focused on the
job and the work area; notice any
changing conditions.
Wear and use only the correct,
approved equipment for the
specific job; be sure it is properly
installed and used.
Welding or its Allied
Processes
Pneumatic,
Electrical,
Gases,
Liquid
Employers must develop a written
lockout/tagout program and
procedure.
Employees must be trained in
these procedures, as well as the
purpose and methods of
lockout/tagout.