Sanremo Opera, Instructions Manual

Page: 52 / 68

06-2017
20 / 24
OPERA
CAP. 5
Operation of the machine
EN
• Use the keyboard to set the pre-infusion seconds,
leaving the bar value to “0”.
Press “OK” to confirm and return to the main “Doses”
screen.
• Operate in the same way for all types of dispensing
and all units on the machine.
• Press the “ Post-infusion” field to display the following
screen:
• This screen shows the values set for each type of
dispensing (one or two coffees) and for each unit in
the machine.
Press the “>” arrow on the right of the screen, near
the dispensing type to be edited, e.g. “ Dose 1 Unit
1” to set data to post-infuse one coffee dispensed
from unit 1 and to display the following screen:
• Use the keyboard to set the post-infusion “ml”, leav-
ing the bar value to “0”.
Press “OK” to confirm and return to the main “Doses”
screen.
• Operate in the same way for all types of dispensing
and all units on the machine.
Write machine
• When programming is concluded, press the “Write
machine” button to send the new settings
to the machine software.
When writing is concluded, the “ Writing completed ”
message will appear; press the “Disconnect”
button to disconnect from the machine.