6. Preset programs
With the help of the upper slide control (mode) you can choose between three preset programs: B
(=burst), C (=continuous) or M (=modulation).
Setting suggestion: „M“
6.1. B, or burst treatment method
In the fi rst treatment method, burst (B), single bursts of 7-10 individual impulses in a fi xed
pattern are sent. This is a combination of common TENS and low frequency TENS. In the burst
mode the frequency of stimulation is set by the device and can be controlled separately through
the frequency control.
6.2. C or continious treatment method
The medium adjustment for a continuous treatment method (C), allows the user to deversify the
intensity, pulse width and pulse rate manually.
How to conduct setting can be found in chapter 5.
6.3. M, or modulated treatment method
The third setting is the modulated treatment mode (M). through continuous change in intensity
this method tries to prevent immunisation of the nerve. If intensity is increased in a period of low
intensity within the cycle, intensity can be increased slowly by the control element, so that you will
feel this as an increase.
7. What to observe about the electrodes
Your physician ought to decide, which electrodes to best use for your kind of pain. Do observe the
instructions on electrode placement in the instruction manual in order to keep stimulation effective
during treatment time and to prevent skin irritations. You may only use electrodes with the CE-
certifi cation sign.
The wires delivered with the TENS device are plugged into the sockets at the device. To do so
place the device in your palm and push the plugs at the end of the wire into one of the sockets
(see drawing); you may use one or two connection wires. After connecting the wires please
connect the electrodes to the wire ends (positive and negative terminal). Please be careful when
attaching or disconnecting the wires. Do not pull at the wires, as this may lead to breakage.
zur Verfügung gestellt von Gebrauchs.info
Aktualisierungsstand Gebrauchs.info November 2011