5.2. Control elements and their function
5.2.1. Setting into operation
For setting your sanowell Life Tens into operation turn the intensity dial clockwise until you hear a
„click“ sound. By turning counter clockwise you can turn off the device.
5.2.2. Setting the pulse width
All pulse width-adjustements are made via the left turning knob (pulse width). The pulse width can
be continuously adjusted from 30 to 260 µs.
Recommended setting: 200 µs
Function of pulse width is explained in chapter 4.1.
5.2.3. Setting impulse frequency
All pulse frequency-adjustements are made via the right turning knob (pulse rate). The pulse
frequency can be continuously adjusted from 2 to 150 Hz.
Recommended setting: 100 Hz
Function of impulse frequency can be read in chapter 4.2.
5.2.4. Setting intensity
Intensity is set by turning the intensity dials. Turning clockwise increases, turning counter
clockwise decreases intensity steadily. Always start with the lowest intensity setting and work
your way up slowly until you feel a tingling sensation. Treatment never ought to be uncomfortable
or even painful.
The function of intensity is described in chapter 4.3.
5.2.5. Setting treatment duration
With the help of the lower slide control (timer min) you can choose between three treatment
durations: C for the continuous mode, 30 or 60 minutes.
Recommended treatment duration: 30 minutes
The function of treatment duration can be read in chapter 4.4.
EN
zur Verfügung gestellt von Gebrauchs.info
Aktualisierungsstand Gebrauchs.info November 2011