12. Technical specifi cations
Channels:
Pulse Amplitude:
Pulse Rate:
Pulse Width:
Timer:
Wave Form:
Modulation mode:
Burst mode:
Power Source:
Battery Life:
Operating Conditions:
Storage Conditions:
Dimensions:
Weight:
Safety for electrical shock, type BF.
All electrical specifi cations valid at ± 20 % 500 Ohm load.
dual, isolated between channels
adjustable to maximal 80 mA for positive impulse or to about 10 mA peak
for negative impulse at 500 Ohm load per channel.
adjustable from 2 to 150 Hz
adjustable from 30 to 260 µs
30 and 60 minutes or continuous duration
asymmetrical bi-phasic square pulse
Within 6,5 seconds the pulse duration varies cyclic. The duration
diminishes linearly within 0,5 seconds to a value that is 60% lower than
the initial value. This duration is continuous for 2 seconds afterwards it is
increased again within 0,5 seconds up to the initial value which is held for
3,5 seconds before the cycle starts again.
Bursts consist of pulse width (adjustable) and a frequency of 100 Hz.
Bursts are effected twice a second.
9V battery
approximately 60 hours at regular settings
0 °C to +50 °C at 20 to 75% relative humidity, however with
no condensation, pressure 700 hPa to 1060 hPa.
0 °C to +50 °C at 20 to 75% relative humidity, however
with no condensation, pressure 700 hPa to 1060 hPa.
95 mm (height) x 65 mm (width) x 23,5 mm (length)
115 g (inclusive of battery)
EN
zur Verfügung gestellt von Gebrauchs.info
Aktualisierungsstand Gebrauchs.info November 2011