ISO PREFERRED, 1419 DONELSON PIKE, SUITE A, NASHVILLE, TN 37217
ISOPREFERRED.COM
jljlkjljljlk
ISO Preferred Lumbar Back Brace I (BA201) has a heat moldable posterior panel and two lateral side panels. It is intended to provide
support for the sacrococcygeal junction to the T9 vertebra and supports conditions such as mild disc herniation of the lumbar, strain
or sprain of the lower back, Spondylosis, Spondylolisthesis and Lumbago.
Lumbar Back Brace I
The
ISO Preferred Lumbar Back Brace I
includes lateral support panels and reduces the
time it takes to heal discomfort from injuries or post-surgery. Please follow your
orthopedic professional’s instructions explicitly and adjust or discontinue use only as
directed to achieve maximum benefit for your concerns.
Always Putting Our Patients First
1
. The belt is designed to fit waist sizes Small to 2XL. To apply, lay out the back brace on a
flat surface. Ensure the pull tabs are nearest to the middle of the back of the brace without
the cords bunching up.
2. Position the center of the lumbar back brace over your spinal region at your desired
height. Pull firmly and equally on both sides of the support belt, wrapping and overlapping
them in front of your stomach. Then secure together with fastening fabric.
If the belt is too long or too short, turn belt to inside, unfasten the belt overlap at
position “A” and adjust the length on each side. Adjust both belts equally to position
front and back plates properly. Excess belt may be cut as desired.
Proceed to apply and fasten the belt as instructed above.
3. Adjust the firm removable lateral lumbar pads (one on each side), to the appropriate
position (per your doctor’s instructions) for maximum stabilization and support.
4.
Detach both pull tabs (attached to the cords) from the support belt. While pulling slowly
towards the front towards the front of your stomach, firmly and evenly increase the
compression support to your doctor’s prescribed specific level. Re-attach both pull tabs.
DO NOT OVERTIGHTEN
.
A pocket on the inside of the lumbar back plate will allow you to add a hot or cold pack
to aid in relieving any muscle discomfort.
ISO Lumbar Belt Extension: Universal (Optional- BA202)
For additional length at the waist securely fasten the (optional
) ISO Lumbar Belt
Extension: Universal
to each side of the ISO Lumbar Belt.
3
2
4
2
1
A
A
