background image

Domestic Appliances and Personal Care 

Service

Service

Service

HB 581/A

SUNSTUDIO

COMBI

Solarium

GENERAL

The full-body solarium HB 581/A is equipped with a 
30 minute timer.
After the pre-set tanning time, the appliance
automatically switches off.
The facial tanner (HP 400 lamps) can be switched on
in two steps (180/260W) by means of switch 
SK 1/SK 2.
After the facial tanner has been switched off, it 
can only be switched on again after the lamp has
cooled down for 3 minutes!
It has eleven fans - six in the canopy and four in the 
couch and one in the control unit - for adequate cooling 
of the equipment during operation and two fans for body 
cooling.
If malfunctions occur, thermal switch (SK7/SK9/SK11) 
will prevent the temperature from rising to an 
unacceptable level.
The power supply will only be switched on via the
relays (Re1/Re2) after the timer has been set.

When choosing a place for the appliance, make sure
there is enough free space around the appliance to
guarantee proper cooling.

This solarium has to be connected to 3-phase mains.

TECHNICAL DATA

Operating voltage

:

3 x 230V, 50Hz

Power consumption

:

approx. 4250W

Ballast canopy

:

3 x 100W

:

6 x 80W

Ballast couch

:

14 x 100W

Ballast power unit

:

16 x 80W

Starter canopy

:

16 x S12

:

3 x MagneTek ZG 4,5D

Starter couch

:

14 x S12

Lamp canopy

:  16 x Cleo Performance   80W
:

3 x HP 400

Lamp couch

:

14 x Cleo Performance 100W

Timer

:

30 min.

Safety class

:

double insulation

Test mark

:

CE

Length of mains cord

:

approx. 3m

Irradiation field

:

approx. 185 x 80 cm

Dimensions

:

approx. 208 x 101 x 91 cm
             ( L   x   W   x  H )

Published by Philips Domestic Appliances and Personal Care     Printed in The Netherlands      Copyright reserved     Subject to modification

©

99/11 - 00/10

4322 277 00344

SAP coding HB 581

!

Service

Information

!

Service

Information

Summary of Contents for HB 581/A

















Reviews: