Sanosil Q-Jet Superior
10
4.3 Position
•
Place device on a stable, flat, dust-free, not slippery, horizontal surface which can appropriately support its weight.
•
Point nozzle towards center of the room.
•
Do not point nozzle towards smoke detectors and check with facility management to take appropriate measures that
the
former will not be activated during nebulization process
4.4 Power Connection
•
Before making electrical connections carefully check that the
voltage supplied is compatible with the voltage marked on
the data plate.
•
Insert power cord (2) in IEC power socket.
4.5 Filling
•
Remove tank cap (6)
•
Fill disinfection liquid (max. 4.2 liter!)
The system warns of reaching the max. by an acoustic signal (loud beep)
Liquid level is shown on display with % filling level.
•
Wipe-up any spills with a microfiber towel or rag
•
Do not tip the device on its side at any time unless
completely empty and dry.
CAUTION
Risk of Injuries!
Always wear gloves and safety googles when filling
the tank!
Do not overfill! This will damage the device.
