2 / 32
1. Introduction
Thank you for your selection of our Electromagnetic Feeder Controller, a digital controller for
electromagnetic
feeder (“Controller”).
The electromagnetic feeder is a parts feeder that operates by using the mutual power of alternating
electromagnet and energy accumulated in the leaf spring.
In combination with the dedicated digital feedback controller, the Controller can be operated easily
and efficiently without requiring any difficult adjustment.
Parts feeding speed may stably be
controlled by mounting a piezoelectric vibration sensor.
Before connecting the electromagnetic feeder and performing subsequent adjustment, read the
Manual carefully to ensure proper use of the excellent functions of the electromagnetic parts
feeder.
2. Before Using
Before unpacking, be careful not to have an impact or vibration on the packing.
Unpack, and check the following:
(1) Isn’t there any damage caused during transport?
(2) Are the rating, capacity and model on the nameplate exactly what you have ordered?
If there is any problem, contact the dealer.
3. Precautions for Safety
Be sure to read the Manual carefully before the installation, operation, maintenance, checkup, etc.
of the Controller to ensure your familiarity with the Controller, safety information and precautions.
In the Manual, the safety precautions are divided into “DANGER” and “CAUTION” according to
their severities.
DANGER
If the Controller is handled improperly, a dangerous situation could be
caused, and the possibility of death or injury is assumed.
CAUTION
If the Controller is handled improperly, a dangerous situation could be
caused, and the possibility of medium or minor injury or partial damage is
assumed.
