Sanken LeaderSamco NS, Technical Manual

Page: 88 / 109

-87-
3201 PID control action selection Other
than 0
E1001 PID control actions can only work under V/f control or
speed control mode
E1901 Simple energy saving mode cannot be used at the same
time with PID control operation
1 E3203 The same PID control cannot be used internally and
externally at the same time.
2 E3203 The same PID control cannot be used internally and
externally at the same time.
4, 5 E3203 The same PID control cannot be used internally and
externally at the same time.
All Exxxx Analog input cannot be repeatedly defined.
3203 Options for external PID
control 1 E3203 The same PID control cannot be used internally and
externally at the same time.
2 E3203 The same PID control cannot be used internally and
externally at the same time.
4, 5 E3203 The same PID control cannot be used internally and
externally at the same time.
All Exxxx Analog input cannot be repeatedly defined.
5001 Number of poles, voltage,
capacity of the motor All Exxxx Motors with a capacity too different from that of the
inverter cannot be selected.
Exxxx The vector control mode is only applicable to motors of 2,
4, 6 poles
E1007
/E1316
/E1317 Exceeding the possible maximum frequency
5011
Primary inductance of the
motor
All E5013
Mutual inductance of motors cannot be bigger than
primary induction of the motor
5012
Secondary inductance of
the motor
All E5013
Mutual inductance of motors cannot be bigger than
secondary induction of the motor
5013
Mutual inductance of
motors
All E5011 Mutual inductance of motors cannot be bigger than
primary induction of the motor
E5012 Mutual inductance of motors cannot be bigger than
secondary induction of the motor
6002 Analog value input of
torque
limiter
(power-driven)
All Exxxx Analog input cannot be set repeatedly
6004 Analog value input of
torque limiter (braking) All Exxxx Analog input cannot be set repeatedly.
6015 Minimum frequency of the
function of motor vibration
reduction All E6016 This value cannot be set above the maximum frequency
of the function of motor vibration reduction.
6016 Maximum frequency of the
function of motor vibration
reduction All E6015 This value cannot be set below the minimum frequency of
the function of motor vibration reduction.
6101 Torque command selection All Exxxx Analog input cannot be set repeatedly.
6103 Maximum value of the
forward rotation side of
torque command All E6104 This value cannot be set below the minimum value of the
forward rotation side of torque command.