SEC3002 FIRE ALARM CONTROL PANEL
Page 19 of 24
Take the prompt as reference:
Load data from U-disk
This function will load the configuration file from U-disk to the panel’s flash and overwrite the
panel’s existing data. So this function must be used with care.
File reset
This function allows you to clear the panel’s memory back to its factory default settings. It is
such a vital operation that only authorized user of level 3 could operate and you should make
sure that you are willing to do so. Better to follow its tips:
Update system
The system allows to be updated on site with additional functions by using a U-disk at the
authorized engineer level for future development. Copy the file needed to the U-disk and
insert it to the USB port. Click ‘Update’ then the panel starts to recognize the data. Operating
as the prompt says will complete.
5.2.6 View system and software version info
The system information as well as the version of each processor with program can be read
When it completes, restart the panel
to take the newly loaded data into
effect.
Press ‘Yes’ to start copy. The process
might take about 30-60s and other
function will be suspended.
Restart the panel after it
indicates the file reset
completes.