SEC3002 FIRE ALARM CONTROL PANEL
Page 13 of 24
Zone setup
When this menu option is selected, a window is shown to allow you to register and add a
description for a specific zone, and to configure the ‘Resound’ option.
Note
: When using the panel networking function, in order to avoid displaying confusion or
communication error, try to configure and register different zones on different networking panels.
Detector/module setup
All detectors and modules in the system can be configured under this setup window by
completing the corresponding options.
Tick the ‘Reg’ will register and assign the device to the loop with a unique ‘Address’ number.
The following is the setup for the Product Type of a detector:
Since the Product Type is an inherent attribute of a field device, the optional product types
provided in this system are listed as follows.
Ionization detector
Optical detector
Heat detector
Strobe
Infrared detector
Combination detector JS input module
Gas detector
JK input module
Output module
Input/output module I/O module-Broadcast
KZJ_LD module
Manual control button Manual call point
Fire indicating panel
Fire hydrant call point
Sounder strobe
Sounder
The following figure shows the setup for the Device Type of an output module:
The ‘Resound’ function is selected
to determine whether the silenced
sounder(s) of all zones will be
resounded on a new fire signal
from any other zone.