12
• Check the status of the battery charge by pressing
brush switch 3. (Fig 9)
• Check that the water filter is clean and free of debris
(Fig 13).
4.2 Preparing the machine and choosing
the cycle
• Press the brush motor button (#3, Fig 9). The light
illuminates.
• Pull the squeegee lifting lever and release it to lower
the squeegee to the floor (Fig 14).
The machine can perform 4 working cycles:
• Drying only cycle
Press and hold lever 5 (Fig 10) for brush rotation; then
press button 2 (Fig 9) to start the vacuum.
• Brushing only cycle
Press and hold lever 5 (Fig 9). Releasing the lever
stops the brush.
• Washing, brushing cycle:
Press button 4 (Fig 9) to enable dispensing of solution.
Press lever 5 (Fig 10) to release solution onto floor.
Fig 12
Fig 13
Fig 14
• Washing, brushing, drying cycle
Press button 2 to start the vacuum, button 4 (Fig 9) to
release solution and press the lever 5 (Fig 10) to start
the cycle.
4.3 Using the machine
WARNING!
Never start the machine without
a brush or pad attached.
• Set the handle set at a comfortable working height.
• Start the machine and select the type of cycle. Start the
cleaning operation by pressing the levers and holding
them pressed to start rotation of the brush or pad and
to dispense cleaning solution, then push the machine
in a forward direction using handles on the handle bar.
• Releasing the lever stops the rotation of the brush and
the dispensing of solution.
WARNING
– to avoid damaging the floor
DO NOT use the machine in a fixed
position with the brush rotation activated.
The machine must be moving while the
brush is rotating.
•
IMPORTANT
– the correct way of cleaning and drying
the floor is to move the machine forward. Moving the
machine backwards damages the blades and does not
allow water to be vacuumed from the floor.
• If necessary, adjust the volume of solution using the
tap (See Fig 15 & 16).
• Check the status of the battery charge by the indicator
(Fig 17).
• Proceed to operate the machine in the normal manner,
releasing cleaning solution from time to time as
required.
• For heavy soil, scrub floor with cleaning solution but
Fig 15 Solution tap fully opened
Fig 16 Solution tap fully closed
