Distributor Name:
_______________________________________________________
Address:
______________________________________________________________
Phone:
_______________________________________________________________
Date of Installation:
_____________________________________________________
Model Number:
________________________________________________________
Serial Number:
_________________________________________________________
Installer/Service Technician:
_____________________________________________
SERVICE:
Always contact your SaniServ dealer or
distributor for service questions or service agency
referral. If your SaniServ dealer or distributor cannot
satisfy your service requirements, he is authorized to
contact the factory for resolution.
Note:
It is the Owner’s responsibility to maintain the
Service Record located on the inside rear cover of this
manual. An accurate record of service performed can
greatly expedite troubleshooting of problems and
significantly reduce repair costs.
PARTS:
Always order parts from your SaniServ dealer
or distributor. When ordering replacement parts,
specify the part numbers, give the description of the
part, the model number and the serial number of the
machine.
WARRANTY:
Remove the Check Test Start (CTS)
form and fill it out in its entirety. Return the original
(white) copy to SaniServ. The Dealer/Distributor retains
the second (yellow) copy and the Owner/Operator
retains the third (pink) copy.
The Manufacturer's Limited Warranty is printed on the
reverse side of the Owner/Operator copy.
TO VALIDATE THE WARRANTY, THE CTS FORM
MUST BE COMPLETED AND RETURNED TO THE
FACTORY WITHIN 30 DAYS OF INSTALLATION.
Note:
The Check Test Start function must be
performed by a qualified technician.
WARRANTY INFORMATION
i
IMPORTANT
This machine was designed
to produce frozen slush
beverages only.
Do NOT attempt to operate
this machine with softserve
or shake type product mix.
Damage to the machine may
occur and warranty will be
void.
IMPORTANT
