16. Removing the Sanipack from the WC suite
Disconnect the electrical power supply.
Turn off the water feed to the WC cistern. Bail out as much water as possible from the cistern.
Disconnect the discharge pipe.
Disconnect the inlet connections.
Unscrew the 2 fastening screws (on the ground).
Ease the fl exible connector off the WC pan spigot and slide the Sanipack out from behind the panel.
Note: To ease replacement of the lid onto the Sanipack case, lubricate the rubber seal with liquid soap before replacing.
Do not reconnect the electrical supply until the re-installation of the unit is complete.
18. Guarantee
2 years guarantee as from its date of purchase subject to correct installation and correct usage.
A
B
C
D
E
F
17. Technical Data
Application
1 WC + washbasin
Maximum Vertical Pumping
4m
Maximum current consumption
1,8 A
Normal Power Rating
400 W
Electric Class
I
Type
ON01-K70
Degree of protection
IP44
Net Weight
4,8 kg
Voltage
220-240 V
Frequency
50 Hz
WARNING: Only installations conforming to the above specifi cations are acceptable.
B
C
F
A
D
E
D
Any replacement of the power supply cable should only be carried out by an authorised SANIFLO service engineer.
DN 20
