Sangoma Europa Vega 50 BRI and Elastix, Setup Manual, Page: 8 / 16

13. Click on “Save” and Apply changes by clicking on the pink ribbon that appears at
the top of the page. Now go to “PBX => PBX Configuration
on “Add Incoming Route” link (Figure 4.
•
Description:
•
Set destination:
example)
PaloSanto Solutions
Sangoma Europa Vega 50 BRI Server Setup Guide
8
Figure 4-9. IVR
. Click on “Save” and Apply changes by clicking on the pink ribbon that appears at
the top of the page. Now go to “PBX => PBX Configuration => Inbound Routes”. Click
on “Add Incoming Route” link (Figure 4.10). Set the following:
Name of inbound route (“Incoming_Calls” in this example)
Set destination: Where the call will be routed. (“WelcomeIVR” IVR in this
anto Solutions
Sangoma Europa Vega 50 BRI Server Setup Guide
. Click on “Save” and Apply changes by clicking on the pink ribbon that appears at
=> Inbound Routes”. Click
Name of inbound route (“Incoming_Calls” in this example)
Where the call will be routed. (“WelcomeIVR” IVR in this