7. Click on the ‘Submit’ button at the end of the page
and you will see the page on Figure 4
Here” pink ribbon on top of the screen.
8. Click on the “Apply Configuration Changes Here” link
Figure 4
9. With this you have finished creating a SIP
register with the Elastix Server.
Routes” to configure the outbound route to
information: (Figure 4
Route Settings
PaloSanto Solutions
Sangoma Europa Vega 50 BRI Server Setup Guide
5
Figure 4-4. Add SIP Trunk
Click on the ‘Submit’ button at the end of the page. The SIP Trunk
and you will see the page on Figure 4-5 displaying the “Apply Configuration Changes
on top of the screen.
n the “Apply Configuration Changes Here” link
Figure 4-5. Apply Configuration Changes Here
9. With this you have finished creating a SIP Trunk that will be used by the
register with the Elastix Server. Now, go to “PBX => PBX Configuration =>
Routes” to configure the outbound route to the Vega 50 Gateway. Fill in the following
Figure 4-6)
anto Solutions
Sangoma Europa Vega 50 BRI Server Setup Guide
SIP Trunk will be created
Apply Configuration Changes
that will be used by the Vega 50 to
PBX Configuration => Outbound
Fill in the following
