PaloSanto Solutions
Sangoma Europa Vega 50 BRI Server Setup Guide
10
Factory default settings
LAN1 IP Address
DHCP
LAN1 IP Address (If DHCP no available)
169.254.xxx.yyy
Web Access Administrator User
admin
Web Access Administrator Password
admin
16. When the WebUI is loaded, go to “Quick Configuration” located on the left side of
the page and click on “Continue” button (Figure 4-12).
Figure 4-12. Quick Config
17. Once there, go to “Basic Config” tab and set the following (Figure 4-13):
General
•
Country: US
LAN – Physical
•
Duplex: Full
