12
GB
F
E
NL
D
3.
Rotate the Tuning control knob to select “On” or “Off”. To activate the traffic announcement
function,select“On”.PresstheTuningcontrolknobtoconfirmthesetting.Todisablethisfunction,
select“Off”.PresstheTuningcontrolknobtoconfirmthesetting.
DAB service following function
If the reception quality of the programme being received decreases, the Gotune can automatically
tune to the programme in another ensemble (if available). For this feature to work, the service
following function must be activated.
Press the SF button to switch service following on / off. The “S/F” symbol on the display shows that
the service following function is activated.
Alternative you can set it in the DAB menu.
1.
When in DAB mode press and hold the Info / Menu button to enter the DAB menu list.
2.
RotatetheTuningcontrolknobtofind“ServiceFollowing”.PresstheTuningcontrolknobtoenter
the setting.
3.
Rotate the Tuning control knob to select “On” or “Off”. To activate service following, select “On”.
Press the Tuning control knob to confirm the setting. The “S/F” will appear on the display. To
disablethisfunction,select“Off”.PresstheTuningcontrolknobtoconfirmthesetting.The“S/F”
will disappear on the display.
Presets in DAB and FM Tx modes
There are 10 memory presets each for DAB radio and FM transmitter. They are used in the same
way for each operating mode.
1.
Press the Power On / Off button to switch on your GoTune.
2.
Tune to the required radio station / frequency as previously described.
3.
Press and hold the Preset button to enter the “Preset Store” menu. Rotate the Tuning Control
knob to scroll through the preset list until you reach an unused preset or a preset that you wish
to change. Press and release the Tuning Control knob to store the preset. “Preset 1 Stored” (for
example) will be shown on the display. The corresponding preset number e.g.“P1” will show on
the display. Repeat this procedure for the remaining presets.
4.
Stations which are already stored in the presets may be over written by following the above procedure.
Recall a preset in DAB and FM Tx modes
1.
Press the Power On / Off button to switch on your GoTune.
2.
Press the Mode button to select the required operating mode.
3.
Press and release the Preset button to display the ‘Preset Recall’ menu. Rotate the Tuning Control
knob to select the desired preset station / frequency. Press and release the Tuning Control knob.
Your GoTune will then tune to the station / frequency stored in the selected preset memory.
Summary of Contents for FMT-02
Page 1: ...Version 1 FMT 02 GB...
