Sangean DT-800, Manual

Page: 14 / 26

013
Your radio is supplied with an AC adaptor.
The AC adaptor should be disconnected from the power supply and the
radio when not in use.
Using the AC adaptor
Place your radio on a flat surface.
Insert the USB plug into the USB charging socket.
Plug the AC adaptor into a standard wall outlet. Whenever the AC
adaptor is used with the radio, it will take over power rather than from
the batteries.
1.
2.
3.
The AC adaptor is used as the means of connecting the radio to
your power supply. The AC socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from
your main power supply completely, the AC adaptor should be
removed from the wall outlet completely.
IMPORTANT
Lock switch
Set the Lock switch located on the right of your radio to the 'Lock'
position . The power and all other buttons will be disabled,
this will prevent accidental operation when your radio is packed in a
suitcase or travel bag. Display will show lock icon .
To release the lock, slide the lock switch down to the unlock position;
the lock icon will disappear from the display.
1.
2.
The Lock switch is used to prevent unintentional operation of your radio.