Sangean DT-800, Manual

Page: 12 / 26

011
Battery operation
Battery operation using rechargeable batteries
Remove the battery cover by sliding the cover in the direction of the
arrow.
Slide the switch inside the battery compartment to the Charge On /
NiMH position.
Insert two rechargeable UM3 (AA size) batteries into the spaces
in the compartment. Ensure all batteries are inserted with correct
polarity. The radio is designed to be used with Nickel Metal Hydride
(NiMH) rechargeable batteries.
Plug the AC adaptor into your radio and then plug the AC adaptor
into your wall outlet.
The Display will cycle through the battery icon indicating batteries are
charging. Batteries will be fully charged in about 7 hours depending on
the battery capacity. The battery symbol will stop cycling through and
will show the full battery icon when battery charging is completed.
1.
2.
3.
4.
5.
The radio is equipped with a battery auto check feature during charg -
ing. The Display will show BT1-NG or, BT2-NG or both with an empty
battery icon indicating the rechargeable batteries have malfunc-
tioned. Replace the batteries according to the display information. If
display shows CHECK with empty battery icon
, please check
both batteries and the supplied AC power adaptor.
NOTE