background image

8

GB

IMPORTANT: 

The  batteries  should  not  be  exposed  to  excessive  heat  such  as 
sunshine,  fire  or  the  like. After  use,  disposable  batteries  should  if 
possible be taken to a suitable recycling center. On no account should 
batteries be disposed of by incineration.

Note:
The batteries can be charged only when the radio is off. Connect the 
mains adaptor into the DC jack socket to charge the batteries. Be sure 
the battery type switch is set to ON. Charge new batteries fully the first 
time before first use. This can take longer depending on the capacity 
of the rechargeable batteries.

Do not use a mix of old and new rechargeable batteries.
Do not use a mix of full and empty rechargeable batteries.
Do not use batteries that have a different mAh capacity.
Do not use damaged or leaking batteries.

4. If the radio is not to be used for any extended period of time it is

recommended  that  the  batteries  are  removed  from  the  radio.  We
would recommend for economy that the DPR-65 is used via the mains 
adaptor whenever possible with battery operation for occasional  use 
only.

Summary of Contents for DPR-65

































Reviews: