background image

2

GB

Important Safety Instructions

1. Read and understand all safety and operating instructions before the
    radio is operated.

2. Retain instruction: The safety and operating instructions should be
    retained for further reference.

3. Heed warnings. All warnings on the appliance and operating
    instructions should be followed.

4. Follow all operations and use instructions.

5. Water and moisture: The appliance should not be used near water.
    Do not use near a bathtub, washbowl, laundry tub, kitchen sink,
    wet basement, swimming pool, etc.

6. Unplug the radio from the AC power outlet before cleaning. Use only a
    damp cloth for cleaning the exterior of the radio.

7. Do not place the radio on an unstable cart, stand, bracket or table.
    The radio may fall, causing serious personal injury and damage to
    the radio.

8. Ventilation: This radio should be situated so that its location or
    position does not interfere with its proper ventilation. For example,
    the radio should not be used on a bed, sofa, rug or other soft
    surfaces that may block the ventilation openings. It should not be
    place in a built-in situation like a cabinet that may reduce air flow
    through the ventilation openings.

9. Power sources: The radio should be operated only from the type of
    power source indicated on the marking label. If you are not sure of
    the type of power supply to your home, consult your radio dealer or
    power company.

10. Mains adaptor: The mains adaptor should be positioned so it is not
      walked on, pinched, or items placed on top of it. Pay particular
      attention to wires at plugs, convenience receptacles, and the point
      where they exit from the unit. Unplug the mains adaptor by gripping
      the adaptor, not the wire. Operate the radio using only the current
      type of power source indicated. If you are not sure of the type of
      power supply to your home, consult your dealer or local
      power company.

11. Do not overload wall outlets or extension cords. This can result in a
      risk of fire or electrical shock. Never insert objects of any kind into
      the radio through opening. The objects may touch dangerous
      voltage points or short out parts. This could cause a fire or
      electrical shock.

12. If the radio is left unattended or unused for long periods of time,
      unplug it from the wall outlet. This will prevent damage caused by
      lightning or power line surges.

13. If the radio is left unattended or unused for long periods of time,
      remove the batteries. The batteries may leak and damage furniture
      or your radio.

Summary of Contents for DPR-17
































Reviews: