Operating your radio - FM
1.
Fully extend the telescopic aerial.
2.
Press the
StandBy button
to switch on your radio. The display will
show "DAB digital radio" for a few seconds.
3.
Press the
Band button
to select the FM band.
4.
Press and immediately release the
Auto Tune button
, your radio
will scan in an upwards direction (low frequency to high frequency)
and stop automatically when it finds a station of sufficient strength.
5.
After a few seconds the display will update and show station name.
6.
To find other stations press and release the
AutoTune button
as
before.
7.
To scan the FM band in a downwards direction (high frequency to
low frequency) press and hold down the
AutoTune button
for 0.
5 seconds and then release.
8.
When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
9.
Adjust the
Volume control
to the required settings.
10. To switch off your radio press the
StandBy button
.
11
Summary of Contents for DCR-209
