Sangean DCR-209, Operating Instruction

Page: 17 / 116

Setting the alarm time
1. Repeatedly press and release the Info button until the display
shows Alarm Status .
2. Press the Select button the display will show Alarm Time Set. The
minutes digits will begin to flash in the display. Set the required minute
using the
Tuning Up/Down buttons .
3. Press the Select button . The hours digits will begin to flash in the
display. Set the required hour using the Tuning Up/Down buttons .
4. Press the Select button to confirm the alarm setting. The display
will show Alarm Status On together with the alarm time. After a few
seconds the display will revert to showing real time.
A symbol will appear in the display indicating that the alarm is
active.
Note: Alarm times are set using 24Hr format e.g. 2:30PM is
entered as 14:30
16
GB