2)
Seat the patient in the treatment chair after make him wear the protective glasses. The operator
should also wear protective glasses. The operator then chooses the best operating position between
the treatment range and the touch control screen.
3)
Paste 1-2mm cold gel on the area need treatment, by doing this will help the skin to remain cool
under the laser pulse and increase the rate of the penetration. The light pulse irradiates on the cold
gel, every area that need light pulse treatment should be pasted by new cold gel.
4)
Switch the key clockwise to start the machine, and then the screen will display the main page.
5)
Choose treatment parameters according to the specific conditions of the patient.
6)
After you have adjusted all parameters, press “READY”. Then the machine is in working condition.
7)
Take the handle piece. Press the switch on the handle piece to shot the laser pulses. Keep
pressing the button and the laser output will continue. Do not press & release for single pulse.
