KBox E-420-R1K/V1K - User Guide, Rev. 1.1
// 19
4/
System Overview
The KBox E-420-R1K/V1K is an embedded system enclosed within a compact chassis, offering excellent processing
and graphics performance.
It can be optionally factory-equipped with an mPCIe WLAN / Bluetooth or WWAN card and / or M.2 Key B WWAN card
for three antennas. Users may choose the implementation of an M.2 Key M SSD and / or an M.2 Key B SSD as storage
media.
The following interfaces are available with the KBox E-420-R1K/V1K:
Standard Front Panel:
2x USB 2.0
2x RS232/422/485
1x 8-bit DIO
1x Line-out / Mic-in
1x Power Button w/ LED
1x Storage LED
1x Wireless LED
2x WLAN Antenna Port
1x WWAN Antenna Port
Standard Rear Panel:
1x DP
2x HDMI 2.0
2x GbE LAN
2x USB 3.1
1x Lockable DC Jack or 2-pin Phoenix Connector
1x Reset Button
1x Wafer for External Power Switch
Standard Baseboard and System Expansion Capabilities:
2x DDR4 SO-DIMM memory socket (DIMM1 & DIMM2)
1x full-sized mPCIe socket (MPCIE1))
1x M.2 Key B socket (type 22x42, M2B1)
1x M.2 Key M socket (type 22x80, M2M1)
1x Micro SIM Card Cage (switchable between mPCIe and M.2 Key B, SIM1)
The device is designed to be operated in:
Vertical position: mounted on the back of the monitor or inside a control cabinet / custom enclosure / machine
(with a VESA mounting kit) or
Vertical position: mounted inside a control cabinet / custom enclosure / machine (with a DIN rail mounting kit) or
Horizontal position: placed as a desktop unit.
When powering on the KBox E-420-R1K/V1K, make sure that the cooling fins of the chassis
are not obstructed (covered) by any objects.
To provide sufficient heat dissipation by the cooling of the device, do not cover the cooling
fins of the KBox E-420-R1K/V1K. Do not place any objects on the device. When installing the
system, please keep clearance for air circulation.
