KBox C-103-CFL-x - User Guide, Rev. 1.0
// 57
6.3.6.
Installing/Removing PCI/PCIe Expansion Cards (KBox C-103-CFL-4/-2/-1 only)
The PCI/PCIe expansion cards can be installed into the slots on the front side of the system (Figure 11). The slots are
marked with “PCIe 1” to “PCIe 4”. It is recommended to expand your KBox C-103-CFL with PCI/PCIe cards before it is
installed into a control cabinet.
1.
Close all applications; shut down the system properly and disconnect the connection to the power source.
Disconnect all peripherals.
2.
To have access to the PCI/PCIe sockets you have to open the KBox C-103-CFL-4/-2/-1 as described in the section
6.2 “Opening and Closing the KBox C-103-CFL” (step 1-6).
3.
To remove/install an expansion card, you have to remove the corresponding card/slot bracket (refer to
Figure 11 and Figure 42/Figure 43). Loosen the corresponding fastening screw on the internal side, which secures
the slot/card bracket and remove it. Retain the screw for later use (refer to Figure 42/Figure 43, pos. 2).
Figure 42: Detail of the KBox C-103-CFL-2 with PCIe riser card with 2x PCIe x4 sockets
Figure 43: Detail of the KBox C-103-CFL-2 with PCI-PCIe riser card with 1x PCI (32 bit) and 1x PCIe x4 sockets
Figure 44: Detail of the KBox C-103-CFL-4 with PCIe riser card with 2x PCIe x4 and 2x PCIe x1 sockets
1
3
9
10
2
5
6
4
3
2
2
1
1
3
5
8
7
2
5
6
12
13
11
