KBox C-103-CFL-x - User Guide, Rev. 1.0
// 122
13.2.5.
(X 204) CAN Bus Port
If a termination resistor (120
Ω
) is required, you have to make a connection (bridge)
between pin 1 and 2, respectively pin 7 and 8, in order to enable the onboard termination
resistor (120
Ω
).
Table 46: (X204) CAN Bus Port
Pin
Signal Name
9-pin D-SUB Connector
(male)
1
TERM L
2
CAN_L
CAN_L bus line (dominant low)
3
CAN_GND
(CAN Ground) Reference potential
4
NC
(not connected)
5
NC
(not connected)
6
NC
(not connected)
7
CAN_H
CAN_H bus line (dominant high)
8
TERM H
9
NC
(not connected)
120
Ω
120
Ω
