KBox B-201 - User Guide, Rev. 1.3
// 31
To remove a mPCIe card from the shared mSATA/mPCIE socket, proceed as follows:
1.
Close all applications; shut down the product properly and disconnect the power source. Disconnect all
peripherals.
2.
Open the chassis as described in the Chapter 6.1: Opening and Closing the Chassis, steps 1 to 5.
3.
Locate the mPCIe card installed into your product.
4.
Remove the mountings screw and spacer, and the mPCIe card springs up at an angle of approximately 30° at
the free end.
5.
Gently pull out the mPCIe card from the socket.
6.
Close the chassis, as described in the Chapter 6.1: Opening and Closing the Chassis, steps 1 to 4.