COMe-bTL6 - User Guide. Rev. 1.5
// 88
Function
Second level Sub-Screen/Description
PCI Express
Configuration>
PCIe Root Port> 1,2,3,4,10,11, 21, 22, 23, 24>
(Not mapped to COMe line)
PCI Root Port 5 (COM Lane 0)>
PCI Root Port 6 (COM Lane 1)>
PCI Root Port 7 (COM Lane 2)>
PCI Root Port 8 (COM Lane 3)>
PCI Root Port 17 (COM Lane 4)>
PCI Root Port 18 (COM Lane 5)>
PCI Root Port 19 (COM Lane 6)>
PCI Root Port 20 (COM Lane 7)>
PCI Root Port 9 (opt. device)>
PCI Root Port 12 (on-module Ethernet)>
PCIe Root Port 13, 14, 15, 16>
(Configured as USB/SATA)
Detect Timeout
device and potentially
disabling the port.
[0]
Extra Bus
Reserved
Extra Bus reserved for bridges
behind this Root Bridge.
Range (0-7).
[0]
Reserved
Memory
Reserved memory for this
Root bridge. Range (1 -20 MB)
[10]
Reserved I/O
Reserved I/O for this root
bridge. Range
(4K/8K/12K/16K/20K)
[4]
SATA and RST
Configuration>
SATA Controller
[Enabled, Disabled]
SATA Mode Selection
[AHCI]
SATA Speed Limit
[Auto, 1.5 Gb/s, 3.0 Gb/s, 6 Gb/s]
Software Feature Mask Configuration>
HDD Unlock
Enable indicates the HDD
password unlock in the OS is
enabled.
[Enabled, Disabled]
LED Locate
Enable indicates that
LED/SGPIO hardware is
attached and Ping to local
feature is enabled on OS.
[Enabled, Disabled]
SATA Port 0 (PCH SATA0)>
SATA Port 1 (PCH SATA1)>
Serial ATA Port 2>
Serial ATA Port 3>
Port #
SATA Port (0,1,2,3) enabled or
disabled.
[Enabled, Disabled]
External
Marks port as external.
[Enabled, Disabled]
Spin Up Device
Staggered Spin Up performed
and only on drives with this
option enabled spin up at boot.
Otherwise all drives spin up at
boot.
[Enabled, Disabled]
SATA Device
Type
Identifies connected device.
[Hard Disk Drive, Solid State
Drive]
USB
Configuration>
xDCI Support
Enables or disables xDCI (USB OTG device)
[Enabled, Disabled]
USB2 PHY Sus Well Power Gating
Enable SUS Well PG for USB2 PHY. This option has
no effect on PCH-H.
[Enabled, Disabled]