COMe-bTL6 - User Guide. Rev. 1.5
// 81
Sub-Screen
Function
Second level Sub-Screen/Description
USB
Configuration>
Device Reset Time-out
USB mass storage device start unit command time-out
[1 sec, 5 sec, 10 sec, 20 sec]
Device Power-up Delay
Maximum time device takes before reporting to the host
controller properly. Auto uses default value (for a root port 100
ms and for a Hub port the delay is taken from hub descriptor).
[Auto, Manual]
Mass Storage Devices
Pi-KVM CD-ROM Drive
0510
Mass storage device emulation type. Auto enumerates devices
according to their media format. Optical drives are emulated as
CDROM, drives with no media will be emulated according to drive
type.
[Auto, Floppy, Forced FDD, Hard Disk, CD-Rom]
Network Stack
Configuration>
Network Stack
UEFI Network Stack
[Enabled, Disabled]
CSM
Configuration>
CSM Support
Enables or disables CSM Support.
[Enabled, Disabled]
NVMe
Configuration>
Depends on hardware configuration.
TLS Auth
Configuration>
Server CA
Configuration>
Enroll Cert>
Enroll Cert Using File
Cert Guide>
Input digital
character
Commit Changes and Exit
Discard Changes and exit
Delete Cert>
Client Cert
Configuration
Read Only field
RAM Disk
Configuration>
Disk Memory Type
Specifies type of memory to use from available memory pool in
system to create a disk.
[Boot Service Data/Reserved]
Create Raw>
The valid RAM disk size should be multiples of the RAM disk block
size.
Size (Hex)
Create & Exit
Discard & Exit
Create from file
Create RAM Disk List:
RAM Disk 0:
[Enabled, Disabled]
Remove selected RAM
disk(s)
Removes selected RAM disk(s)
Intel® Ethernet
Controller
Read only Field
UEFI Drivers, Device Name, PCI Device ID, Link Status, MAC Address
Driver Health>
Intel® Gigabit 0.9.03
Provides health status for the drivers/controllers
[Healthy]