18
Manual Tuning
As well as using the auto tune function, you can manually tune the receiver. This can help
you when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press SET on the remote control, then
to select
MANUAL TUNING.
2. Press ENTER, then
to start tuning manually. Press
ENTER again to confirm the chosen station. The
display will show the signal strength of the selected
station:
If the signal strength is greater than the SIGNAL STRENGTH MARKER,
you can tune the unit into the found DAB station. Press SET twice to
confirm.
3. After finding your desired station, press SET twice to
exit the menu and start listening to the station.
DRC
1. Press SET on the remote control, then to select DRC.
2. Press ENTER, then
to select:
OFF
HIGH
lOW
3. Press ENTER to confirm, then SET to exit the menu.
DAB
Strong
Very strong
Signal strength
market
DAB
DAB
DAB
S9DABI12_IB_RC_120910_Zell.indd 18
10/9/12 7:09 PM
