15
Set Time
(Hour, Minute)
Set Source
(DAB/FM/iPod/Buzzer)
Set Repetition
(Once/Daily/Weekdays/
Weekends)
Set Volume
(Vol 5 ~ Vol Max)
Set ON/OFF
SAVED
Setting the Alarm
1. Switch ON the unit and press either
1
or
2
on the
remote control to select AlARM 1 or AlARM 2. Either
will be displayed along with or , which will blink.
2. Press ENTER to start and then press
to adjust
the setting.
3. Press ENTER to confirm and go to the next setup step.
Press SET to go back to the previous setup item.
4. When the alarm is ON and saved, the display will show
SAVED and or will constantly blink.
Switching the Alarm ON and OFF
1. Ensure you are in standby mode and then press
1
or
2
key to activate/ deactivate the alarms, or switch on
the radio and press
1
or
2
on the remote control to
select AlARM 1 or AlARM 2.
2. Then press
to select ON/OFF. Press ENTER to
save the setting. SAVED will be displayed to show the
task has been successful.
Snooze and Acknowledging the Alarm
1. While the alarm is active, press SNOOZE on the remote control or the unit to take the
alarm into snooze mode (the alarm will automatically default to a 5-minute snooze if
not present). “ “ will be displayed and [alarm1] or [alarm2] will blink to indicate that
snooze mode is active.
2. To acknowledge the alarm, press any key on the remote control or SNOOZE on the
remote control.
While SNOOZE mode is active, press
1
or
2
to deactivate the snooze function.
“ ” will disappear from the display.
S9DABI12_IB_RC_120910_Zell.indd 15
10/9/12 7:09 PM
