Installation & Operation Manual Merlin 1000BH
Rev: 09 03-21
8
Installation Details
Please pass this manual to the system owner / user.
Date of Installation:
Installation Location:
Organisation:
Stamp/Signature of the installer:
We recommend all Merlin gas detection equipment be commissioned by a competent/trained engineer to ensure
correct installation and operation. The Merlin range of gas detectors are calibrated when manufactured, however,
we strongly recommend the detectors response and alarm signals are tested and validated once installed. This will
ensure the equipment performs as intended and is free from any unforeseen damage caused by transit/installation.
Every effort is made to ensure the accuracy of this document; however, S&S Northern can assume no responsibility
for any errors or omissions in this document or their consequences. S&S Northern would greatly appreciate being
informed of any errors or omissions that may be found in the content of this document. For information not covered
in this document, or if there is a requirement to send comments/corrections, please contact S&S Northern using the
contact details given below.
S&S Northern Head Office
Tel: +44(0) 1257 470 983
Fax: +44(0) 1257 471 937
www.snsnorthern.com
[email protected]
South East Division
Tel: +44(0) 1702 291 725
Fax: +44(0) 1702 299 148
[email protected]
S&S Northern is the owner of this document and reserves all rights of modification without prior notice.
