Sandri Garden SG 1225/25 CS, Instruction Manual, Page: 53 / 104

53
B1 - tHROttLE LAtCH (see fig.1
item 8) avoids the throttle lever from
being accidentally operated.
tHROttLE LEVER (fig.1 item 9).
DANGER : Be aware that the cut-
ting chain will continue to turn for
some time after the throttle lever is
released.
B2 – StOP SWitCH (fig.1 item 11)
when the lever is lowered [ "0" -
fig.27] the engine is stopped.
B3 - SAFEtY CHAiN BRAKE The
chain saw is fitted with a safety chain
tional.
if not, do not use the chain saw and
contact an approved service centre
to have it repaired.
3. DESCRiPtiON OF MACHiNE
PARtS
DESCRiPtiON Fig.1
1) Chain lock latch pin
2) Chain
3) Chain guide bar
4) Guide bar guard
5) Spike
6) Hand front guard / Safety chain brake
lever
7) Right hand top handle
8) Throttle lever latch
9) Throttle lever
10) Left hand front handle
11) Engine stop switch [StOP]
12) Fuel flow adjustment screws
13) Fuel tank cap
14) Chain oil tank cap
15) Starting cable handle
16) Guide bar tightening nuts
17) Chain tensioner screw
18) Chain tensioner tooth
19) Chain brake cover
20) Starter
21) Air filter cover
22) Exhaust silencer
23) Air filter cover knob
24) Support cord hook
25) Choke/throttle advance knob
26) Fuel primer
27) Drive sprocked
28) Chain brake cover knob
Fig.27
StOP
brake (fig.1 item 6) which locks the
chain in position (in the event of a
kickback) in a fraction of a second.
B4 - CHAiN LAtCH PiN (Fig.1
item 1). This device prevents the
chain from being thrown off in case
of breakage (or if the chain comes
off the guide bar groove) during its
operation.
Before each use, check that all
safety devices are fully opera-
PEtROL CHAiN SAW FOR tREE SERViCE USER MANUAL
GB